My-Cap K Cup Saver Review

Are you one of those people who adore their home Keurig coffee makers? This is one of the simplest and most efficient ways to make hot, aromatic coffee in the morning without having to handle coffee grinding, water filling and other procedures typical for alternative coffee makers.

A product has been designed for usage alongside the Keurig coffee maker. Its main aim is to decrease the price per cup of coffee and it is called My-Cap (http://www.my-cap.com) for the Keurig K cups.

K cups are the secret responsible for the high quality coffee you enjoy in the morning. Each one of them, however, costs anywhere between 45 and 65 cents. Reusing the K cup is going to bring that expenditure down.

My-Cap fits comfortably on top of a used K cup and seals it perfectly. The product is designed for long term usage and it will not fall apart, thus losing quality or affecting your morning cup of coffee.

This solution comes as an alternative to the Keurig reusable system, which many people are uncomfortable with. The system consists of a reusable filter, which according to many customers, decreases the quality of coffee. This reusable basket is also quite bulky and difficult to store.

The manner in which My-Cap functions is exceptionally simple. The Keurig K cup can be reused, as long as one finds a way to put fresh coffee inside and to keep it there. This is where the device comes in handy.

Once you buy My-Cap, you will simply have to store the K cups after using them. Remove the coffee inside and rinse thoroughly. Place your favorite coffee in the cup and snap My-Cap on top of the K cup. This is sufficient to seal the cup and to turn it into a reusable one. A simple brush is used to remove excess coffee from the lid. You are now ready to make your deliciously enjoyable morning coffee.

 

Buying an Air Conditioning System

The selection and installation of an air conditioner is a major project for both businesses and homes. It is important to replace your failing unit before it breaks down completely if possible. On the other hand, it also makes economic sense to obtain the greatest possible use from your old air conditioning unit. According to Conditioned Air Solutions (http://www.conditionedairsolutions.com/), additional factors to consider in your purchase decision include the type, efficiency and functionality of your new unit, the square footage needing to be cooled, and your choice of installer.

Efficiency

Efficient air conditioners are more expensive.

  • Compare the initial cost of a new unit against its operational cost.
  • Central units for residential use are typically rated with the Seasonal Energy Efficiency Rating system. This rating allows you to make an effective comparison of the operating costs of different units.

Types

AC Units normally come as: portable units, central air units and room units. A portable air conditioner is easily moved from room to room; they are a cost-effective method of cooling a single room. Central cooling units cool your whole home and cost less to operate than multiple room or portable units. A central air conditioner also makes less noise since the indoor unit is typically installed in the attic, away from the living areas.

Area

If an air conditioner is too small, it may not provide adequate cooling even if it runs continually. An air conditioner that is too large may cost more to operate because it is frequently turning on and off. Large air conditioners that cycle on and off frequently may also have difficulty with removing excess moisture from the air.

Functionality

All air conditioners can perform the basic function of cooling air, but many units can perform other tasks. Many modern air conditioners have a dehumidifier that reduces the moisture in the air as it passes through the unit. Some air conditioners also have an electronic air filter that removes particles from the air, which can be helpful if you have allergies.

Installation

The installation of a central unit generally requires a professional contractor who is licensed to perform this task. It is important to select an installer who specializes in your particular type of installation. Businesses should especially careful to hire installers with experience in commercial air conditioners, as these units are much larger than residential units.

 

Termite Control – The Organic Way

Guest post from Sam Tidwell.

The infestation of termites, in American homes, is a real and serious matter. According to the US Forest Service, the heaviest regions for termite burrowing occurs in the lower southeastern part of the country, and in the state of California. This does not mean that the remaining regions are free from termite damage, only more moderate, in vulnerability. It is estimated that each year, over $5 billion is spent in the damage and prevention of these eusocial insects.

Understanding What Termites Need for Survival

The termite has recently been reclassified as part of the cockroach family. This fact alone, could help scientists further their studies in the way that these insects survive and breed. Termites need moisture in order to sustain life. Thought of to be a natural born insect of Africa and Australia, termites have adapted well in the United States by locating sources of cellulose. Today’s cellulose is a popular by-product of wood building materials, paper and glue. When they smell the organic aroma of cellulose in the frame of a house, it is attracts them like bees to honey.

Natural Products that Halt the Spread of Termites

Because termites are attracted to the properties of wood, it can seem an impossible task to prevent the infestation of these insects. However, there are proven methods to use, without applying poisonous chemicals.

Place a border around the perimeter of a foundation, using sheet metal. This idea is simple and can safeguard your foundation against any type of insect that uses burrowing as a method of entry. However, if there is the smallest gap or crack, termites will find it.

Cardboard can be used as bait around the exterior of your home. Since cellulose is used in the production of cardboard, the termites will stop and set up house on the cardboard, instead of continuing on to the home’s wood supply. The trick behind this method, though, is to keep the cardboard from drying out. Once the cardboard becomes dry, these insects will move on to another source of food.

Boric Acid has been found to be a good deterrent for protecting wood. The application of Boric acid on wood, helps to destroy dry and wet rot. It further has a poisonous effect on termites, roaches and ants, when ingested. This method is best used before building a home to insure that all wood fiber has been successfully treated.

The most popular, and beneficial, organic method of stopping termites, is with orange oil. Orange oil is a byproduct of orange peel and contains an active ingredient called D-Limonene. When wood is injected with orange oil, termites can no longer feed on the wood’s moisture supply. By ingesting the orange oil, termites die from the drying up of cell membranes. Without water and a source of nutrition, the colony is soon eliminated. The residue left by orange oil acts as a warning to any new termites searching for a home.

The study of orange oil is ongoing as an effective natural treatment against termites. Together, with the research of further understanding the life habits of termites, orange oil is emerging as the number one deterrent in organic termite treatment. It has been discovered that a colony of termites can be burrowed in new wood, and remain undetected, for up to 5 years. Using a method that guarantees the extermination of termites in wood, from the inside out, has given new hope to the extensive termite problem. Many termite and pest management companies now carry orange oil as an alternative method for treating homes. Ask your pest specialist about organic products available. Chances are, orange oil will be among the options.

This site does not endorse orange oil treatment as we don’t have enough information. There have been both many positive and negative reviews on the product. Most negative reviews are about the need for multiple applications.

Home Repairs Save Money In The Long Run

Through daily use and constant wear and tear, things in the home wear out and get broken. For this reason a constant attention to maintenance and repairs are required if your home is going to remain in good condition and retain its value. When needed repairs are deferred, they can turn into an unnecessary expense that could have been avoided. Many repairs can be completed by the home owner, but there are some that should only be tackled by a professional.

While it is true that many items on the home can be repaired, there are some that should simply be replaced. Often times, window screens only require the spline to be run back in the groove, but there are other times when a whole new screen must be manufactured to completely cover the opening. The same is true for doors. A good craftsman may be able to repair a broken door, but before agreeing to this, make sure that you will not be losing any security when this is completed. Otherwise, it may be a better idea to just install a new door.

Cost is always a factor when considering home repairs and the wise home owner will certainly want to save money by doing some of the work themselves. However, not everyone is a do-it-yourself with enough experience with to accomplish home repairs correctly. When that is the case, remember that by putting off small repairs now you could be setting yourself up for more expensive ones in the future. It is never a good idea to let your home and your security suffer simply because you want to save money.

Installing Carpet Tile

Recently I added a post about using carpet tile in your home. Here is the follow-up on installing it yourself.

Installing carpet tiles is a much easier do-it-yourself job than stretch-in installation, as long as you follow the correct procedure. This type of carpet is installed piece by piece, so finding the starting point is perhaps the most difficult part. Once you get started, this job will go by very quickly and you will have your new carpet ready to use in no time at all.

Find the Center of the Room

Use a chalk-box to snap a line at the midpoint of the opposing walls in the room. You will begin the installation at the center of the room and then work towards the outside. Once you find the midpoint between both sets of walls, the lines will intersect in the center of the room.

Square Your Lines

Before you begin the installation, make sure that the lines are squared. Measure four feet out from the center point on one line and three feet out on the other line. The two marks should be five feet apart for your lines to be squared. If they are not, make the necessary adjustments.

Equal the Edges

Make sure that the tile closest to the wall will be at least half a tile wide. Do this by laying out tiles towards the wall and then stopping when you cannot fit an entire tile between the last tile and the wall. You can then adjust the tiles so that you have room for half a tile on each side. This ensures that both sides are even.

Start Laying Tiles

Begin by laying the center tiles. Put one tile in each quadrant of the center of the room. You will then build out from the square that you have formed. Once the first square has been completed, you can move onto the second and third squares. Continue forming squares until you get close to the wall.

Trim the Tiles to Fit

The tiles that border the walls will have to be trimmed, unless your room is perfectly shaped for these tiles. Measure the area between the last tile and the wall and draw a matching line on the back of the tile. Continue this process until every space has been filled.

Roll Your Floor

Use a 75-pound roller to press the adhesive down and keep the tiles in place permanently.